TIG-250 Manual Inverter DC Pulse Argon Arc Welding Machine
TIG-250 Manual Inverter DC Pulse Argon Arc Welding Machine TIG Welding Machines Welding Power Source Selangor, Malaysia, Kuala Lumpur (KL), Klang Supplier, Manufacturer, Supply, Supplies | HH Automation Sdn Bhd
TIG-250 type arc welding machine adopts advanced Pulse Width Modulation (PWM) technology and insulated gate bipolar transistor (IGBT) power module to convert power frequency to intermediate frequency, so as to replace the bulky traditional arc welding machine with a compact intermediate frequency transformer The power frequency (low frequency) transformer of the TIG-250 type arc welding machine is equipped with arc starting current, current ramp-up time, welding current, base value current, duty cycle, current ramp-down time, arc ending current, after The adjustment knobs such as air supply time, pulse frequency and cleaning effect can realize continuous and stepless setting parameters. This series of welding machines use high-frequency and high-voltage devices to start the arc when argon arc welding is performed to ensure a very high success rate of arc ignition.

Technical parameter Specification
Model TIG-250
Rated voltage(V) 3¡«400±10%
Frequency(HZ) 50/60
  TIG welding Hand soldering
Input Current(A) 13.5 18.5
Input power(KW) 9.1 12.6
No-load voltage(V) 72 72.5
Welding current range(A) 5¡«250
Continuous duty rate (40¡æ, 10 minutes)

60% 250A

100% 195A
Slow rise and fall time£¨S£© 0¡«10.0
Front/rear air supply£¨S£© 0¡«2.0/0¡«10.0
Pulse frequency£¨Hz) 0.5¡«200
Duty cycle£¨%£© 5¡«95
Power factor 0.65
Efficiency£¨%£© 85
Protection class IP21S
Cooling method Air cooling
Circuit breaker standard LW31-32B-4AB-04/2
Dimension(mm) 510*240*420
Weight(kg) 15.1

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version